UNIQUE HAZER 2.1
Unique haze machine, 1L fluid included with the hire. Further fluid available to purchase on request.
DMX as standard, variable output and haze density, minimal warming up time, easy handling, very low fluid consumption
Minimal warm up time
The very short warming up time of approx. 60 seconds means the UNIQUE 2.1 is ready for operation almost immediately.
A continuous output is guaranteed by the fact that the machine does not have to warm up during operation.
The pump and the fan of the machine can be adjusted separately in 99 steps. Thus the user is able to adjust the density and output exactly. A non-linear pump regulation make sure that the pump can be adjusted much better at the lower steps.
Due to the fact that the pump and the fan can be dampened, the sound of the UNIQUE 2.1 can be absorbed tremendously.
The machine can be used in fields of operation where any sound is undesirable.
The UNIQUE 2 can be controlled via DMX 512. Pump and fan can be adjusted separately. 5-pin-XLR using two following control channels at the desk.
The DMX start address is set and saved with the buttons at the display and remains saved even if the machine is disconnected from the mains supply.
Stand-alone mode controlled directly at the machine.
With the internal Timer the haze time can be adjusted in Seconds, the wait time in Minutes and the output of the pump and fan in %.